It is well known that child safety seats are used to protect the safety of children in cars, but do you know? Because the car is in a relatively closed environment with ordinary ventilation, which is easy to breed bacteria and endanger the health of children, the cleaning of the safety seat is also very important. How to properly clean the safety seat to make the baby ride more comfortable? This is a headache for many parents who buy safety seats. It is roughly divided into four points: 1. Find a large enough place to remove the safety seat from the car, and then place it in a place with good light and ventilation. Then use a vacuum cleaner to clean the interior of the safety seat, dust, and some debris. Pay special attention to the cushion of the safety seat. You can use a sponge or rag to sweep all the gaps and dead corners. 2. The best way to clean the textiles of the safety seat is to remove these cloths and soak them in warm water. The water temperature should not be too high, just lower than that of the human body. Add some neutral detergent, soak them for about 15 minutes, and finally scrub them manually. (Note: It cannot be ironed, but must be dried naturally) 3. Cleaning of the plastic part is also very important, especially for some frosted plastic surfaces, scrub them with wet cloth and warm water, and then dry them naturally. 4. After completing the above three steps, dry the seat in the sun, and then reassemble the seat to the car after ultraviolet sterilization. Sometimes, the cloth or leather may be damaged due to improper use and other reasons. It is better to repair this time, because the baby likes to pull things, and it is better to repair it in time to prevent the hole from getting bigger and affecting the appearance.